Difference between revisions of "Focus"
Jump to navigation
Jump to search
(Created page with "= Focus = Reach unit with the camera automatically using UnitID. Centers between Unit ID 1 and Unit ID 2. Thus, if the two are identical, focuses on that unit. See Also: E...") |
(No difference)
|
Revision as of 01:46, 30 December 2013
Contents
Focus
Reach unit with the camera automatically using UnitID. Centers between Unit ID 1 and Unit ID 2. Thus, if the two are identical, focuses on that unit.
See Also: {19}Camera {E5}WaitForInstruction
Unit ID 1 : Byte (hex)
ID of the unit specified in the ENTD.
Unknown 1 : Byte (hex)
Always x00.
Unit ID 2 : Byte (hex)
ID of the unit specified in the ENTD.
Unknown 2 : Byte (hex)
Always x00.
Unknown 3 : Byte (hex)
Almost always x00; sometimes x01.
