Difference between revisions of "UnitAnim"
Jump to navigation
Jump to search
(Created page with "= UnitAnim = This instruction is used load a humanoid shaped sprite off EVTCHR.BIN on a sprite using the original unit's palette. See Also: Event_Instruction_3B|{3B}SpriteM...") |
(No difference)
|
Revision as of 22:45, 29 December 2013
Contents
UnitAnim
This instruction is used load a humanoid shaped sprite off EVTCHR.BIN on a sprite using the original unit's palette.
See Also: {3B}SpriteMove {86}TempWeapon {87}Arrow {79}MovementAnim {E5}WaitForInstruction
Unit ID : Byte (hex)
ID of the unit specified in the ENTD. The EVTCHR sprite will be pasted directly over the unit.
Affect All : Byte (hex)
0x01 : Affect all units on the field and not only the one assigned with the Unit ID.
SEQ ID : Byte (hex)
Load an animation sequence from the corresponding SEQ file for a unit.
EVTCHR Frame : Byte (hex)
Load an animation sequence or stance from the loaded EVTCHR.BIN block.
- 0x00 = Use SEQ animation
- 0x01 = EVTCHR Block 1
- 0x02 = EVTCHR Block 2
Unknown 1 : Byte (hex)
This always seems to be x00 and sometimes x01.
